|
DSCF0924
RV-8 Wing tips.Killacycle LED position lights, NOVA strobes.
Date: 04/01/2012
Views: 23
|
DSCF0944
Thorp T-18. Recently purchased from Ed Ullrich EAA Chapter 26. It hasn't flown in 9 years. After 4 days work, it's seen here taxiing under it's own power.
Date: 04/08/2012
Views: 36
|
DSCF0884
First TAXI test. Everything went well. The engine ran perfectly, and the ground handling of the RV-8 was great.
Date: 03/01/2012
Views: 64
|
|
DSCF0791
Don't feel too bad for the Cruisemaster, it's living here now. Marilyn and I have been chipping away at this hangar & home project for the last 10 years. Well at least we got the hangar....
Date: 11/10/2011
Views: 106
|
DSCF0840
Lots of work to go inside the fuselage. Here is the flap motor and bellcrank assembly. I've fabricated the push rods and fit the flaps...now to enlarge the push rod hole in the fuse, and hook it all up, adjust it and fit the fillet fairings.
Date: 11/19/2011
Views: 94
|
DSCF0826
One small step, but the plastic sheeting is off the canopy, and gives a strong impression of a real airplane.
Date: 11/14/2011
Views: 108
|
|
DSCF0821
The wings went back on quickly. I started hooking up the flight controls, and Marilyn started polishing.
Date: 11/12/2011
Views: 110
|
DSCF0781
The Cruisemaster gets the boot!! The wings are brought up to the hangar the day after the fuselage was squeezed in. Now the Bellanca goes to it's new hangar, and the wings go on the RV-8.
Date: 11/09/2011
Views: 142
|
DSCF0769
The Big Day! Out to the Airport for final assembly
Date: 11/08/2011
Views: 98
|
